Tobisho Barracuda Clippers
These Tobisho Barracuda Clippers are really something special.
Tobisho is known for making some of the finest tools out there…
£180.00
In stock
These Tobisho Barracuda Clippers are really something special. Tobisho is known for making some of the finest tools out there—drop-forged, top-quality steel, beautifully balanced, and finished in their signature vintage-style colours. But then they created these: a perfect fusion of topiary clippers with the reach and precision and the cutting power of bypass secateurs.
Ideal for tackling tough boxwood (which was historically used for printing blocks, so you know it’s hard material), these shears make reshaping old topiary a breeze. Professional growers swear by them for heavy winter pruning— we’ve seen Monty Don and Alan Titchmarsh using these on tv. Once you try them, you’ll see why they are a good choice.
Product information
- 292g
- 264 x 51 x 21mm
- 110mm blades
- S58C Carbon Steel
- Red & Yellow Grip handles
- Made in Japan
- Includes Spare Spring
Best usage
- Clean with a Niwaki Clean Mate rust and sap eraser
- Sharpen with a Niwaki #1000 grit stone
- Protect with Niwaki Camellia Oil
Caring For Your Tools
Most of our Japanese garden tools are made from carbon steel - this means they will, through regular use, stain (and eventually rust) and gradually lose their edge. Caring for them involves three things…
1. Correct Use:
- Japanese steel is hard and sharp, and can be more brittle than some people are used to - it will chip if abused
- Do not cut wire, metal, stone, plastic or any other hard material (even bamboo fibres and some very hard woods, especially knots and burrs, can damage steel edges)
- Do not twist or apply uneven pressure
- Cut diagonally across branches (not straight across) so you cut along the fibres
- Pay attention to the maximum cut dimensions, and don’t overdo it (shears are not loppers)
- Use the base of the blades, not the tips, for heavier cuts
2. Keeping them Clean:
- Remove leaf resin, rust and gunk with a Crean Mate and water
- Dry, wipe over with Camellia oil and store in a dry place
Â
3. Keeping them Sharp:
New tools won’t need sharpening for some time, but after a while you’ll notice them gradually lose their edge, especially if you’re box clipping (you need REALLY sharp blades to get a good finish with box). Use the Niwaki Sharpening Stones for best results (#1000 grit is best for general sharpening).
- Sharpen Secateurs every couple of weeks
- Sharpen Shears and Topiary Clippers EVERY TIME you use them - the difference is amazing
See more information on our 'Sharpening' tab...
Sharpening
Keeping Them Sharp:
New tools won’t need sharpening for some time, but after a while you’ll notice them gradually lose their edge, especially if you’re box clipping (you need REALLY sharp blades to get a good finish with box). Use the Niwaki Sharpening Stones for best results (#1000 grit is best for general sharpening).
For Secateurs:
NB. We strongly advise NOT taking your secateurs apart - they never go back together quite the same.
Sharpen Secateurs every couple of weeks.
Our Niwaki Sharpening Stones work for just about every edged blade:
- #220 Grit: Coarse, for rough blades
- #1000 Grit: Fine, for regular sharpening - the most useful stone for every day sharpening
- #3000 Grit: Super fine, for honing and detailed work
- Soak stones in water for a few minutes before use, and keep wet during use
- Use the concave edge of the stone, moving from the pivot towards the tip of the blade, following the curve as you go.Sharpen Shears and Topiary Clippers EVERY TIME you use them - the difference is amazing
For strait bladed tools:
- Use the flat side of the stone. Then back again - back and forth along the whole length of the blade
- Use as much of the stone as possible, not just the top inch
- This is a gentle action - don’t use too much pressure
- Next, turn the tools over, and use the flat side of the stone to smooth the burr off the inside of the blade, going slightly over, creating a very fine bevel
- Use the convex edge of the stone to clean off the curved edge of the bypass
- Finally, clean and dry the secateurs, and wipe with Camellia Oil
- If you need any more information please contact us.
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.